Call Ralph Text Book

Getting to Mount Seaview Resort

Mount Seaview Resort is at 175 Mount Seaview Rd, Mount Seaview NSW 2446, just off the Oxley Highway between Wauchope and Walcha. Here is how far it is, how long it takes, and what to know before you drive in.

Distances and drive times

Approximate, by road. The range section is slow, so allow extra time.

Directions

From the coast: leave the Pacific Highway at Port Macquarie and follow the Oxley Highway west through Wauchope, Long Flat and Ellenborough. Turn off at Mount Seaview Road.

From the tablelands: leave Walcha heading east on the Oxley Highway past Apsley Falls. Go down the range and past Gingers Creek, then turn onto Mount Seaview Road.

The full Wauchope to Walcha section is about 163 km and very winding. Riders should read our motorcycle page.

Fuel, phone and road tips

Book before you set off

Pick a room or a camp site. Book online through Booking.com, or call or text Ralph on 0451 303 333.

Questions people ask

How long does it take to drive from Port Macquarie to Mount Seaview Resort?+

About 1 hour 15 minutes for roughly 80 km, via Wauchope and the Oxley Highway.

Is the road to Mount Seaview sealed?+

The Oxley Highway is sealed. It is steep and winding on the range, so allow extra time, especially when towing.

Where is the nearest fuel?+

There is no fuel at the resort. The nearest fuel is at Gingers Creek Roadhouse, about 26 km west, and Long Flat, about 30 km east. Wauchope and Walcha are the safest places to fill up.

Will my phone work at the resort?+

Optus works on site. Telstra, Vodafone and other networks are patchy or have no signal, so let people know before you arrive.

What is the nearest airport?+

Port Macquarie Airport, about 80 km away, roughly 1 hour 15 minutes by car.

Ready to stay?

Book online, or call or text Ralph on 0451 303 333 for groups, clubs and anything you want to ask first.

More from Mount Seaview